ELECTRONIC machine suitable for the production of 2 cords with 3 heads, simultaneously, from 5 to 20 mm diameter.
T 106/6 has the option on each twisting devices to mount up to 28 spools for rotating core creel.
It is also possible to use any type of yarn, also of recovery, which will form the core of the cord, recovered by 8 bobbins truncated cones.
T 106/6 has 6 twisting devices that can be loaded with yarns of the different colors, so to obtain a nice effect of vivid colors alternating between them. The production of the various diameters of the final cords, between 3 and 20 mm., will be determined by the amount of yarns used for each core and by the various twists applied to the heads.
T 106/6 on request is possible, with the use of a particular kit, to perform the production of 1 cord with 4 heads.
T 106/6 is provided with core guide bushings diameter of 8 mm and on request, the user can ask also the diameter 3 mm and 5 mm.
T 106/6 is provided with an electronic system for the control of the speed changes of the twisting devices, of the torsion and tension for the production of the cord, supported by a PLC of new conception, simple and efficient. It is already on the machine and is equipped with a keyboard and display for viewing and programming data. The PLC stores for each product code the speed
of twisting devices, the upper take down, the take down of the twisting plate, the eventual folding, the final diameter of the product, as well as the color of the same, the rotation direction, the diameter of the cord, the number of bobbins and denier of covering yarn.
The above data, as well as being stored in memory, are kept constantly under control during production. To all this, we have to add that the same PLC also check the integrity of the yarns covering of the cord.
T 106/6 is provided with 4 cylindrical box for the collection of cordons of small diameter and with a meter counter with preselection that gives indicatively the production according to the diameter and twisting.
T 106/6 on request is provided with a collector device of the product on bobbins.
T 106/6 by a check panel on board controls the operation of the doors avoiding opening up to the total stopping of the moving parts in the machine and preventing, in the case of the open door, the start up for the cycle production in compliance with current EC standards.

ELECTRONIC machine suitable for the production of 1 cord with 3/4 heads, simultaneously, from 12 to 35 mm diameter.
T 212/4 has the option on each twisting devices to mount up to 54 spools for rotating core creel.
It is also possible to use any type of yarn, also of recovery, which will form the core of the cord, recovered by 12 bobbins truncated cones.
T 212/4 has 4 twisting devices that can be loaded with yarns of the different colors, so to obtain a nice effect of vivid colors alternating between them. The production of the various diameters of the final cords, between 12 and 35 mm., will be determined by the amount of yarns used for each core and by the various twists applied to the heads.
T 212/4 is provided with an electronic system for the control of the speed changes of the twisting devices, of the torsion and tension for the production of the cord, supported by a PLC of new conception, simple and efficient. It is already on the machine and is equipped with a keyboard and display for viewing and programming data. The PLC stores for each product code the speed
of twisting devices, the upper take down, the take down of the twisting plate, the eventual folding, the final diameter of the product, as well as the color of the same, the rotation direction, the diameter of the cord, the number of bobbins and denier of covering yarn.
The above data, as well as being stored in memory, are kept constantly under control during production. To all this, we have to add that the same PLC also check the integrity of the yarns covering of the cord.
T 212/4 is provided with 2 cylindrical box for the collection of cordons of small diameter and with a meter counter with preselection that gives indicatively the production according to the diameter and twisting.
T 212/4 on request is provided with a collector device of the product on bobbins.
T 212/4 by a check panel on board controls the operation of the doors avoiding opening up to the total stopping of the moving parts in the machine and preventing, in the case of the open door, the start up for the cycle production in compliance with current EC standards.

High speed SEMI-ELECTRONIC spiral covering machine with 3 independent heads suitable for the production of “gimp” i.e. covered yarn.
PENELOPE 3 is provided with a selector for the control and management of 3 heads and independent stop of the covering spindles.
PENELOPE 3 is driven by 3 separate motors that allow a marked working flexibility in every circumstance.
PENELOPE 3 is provided with an INVERTER for the machine speed rotation adjustment between 0 and 15.000 rpm.
The finished product is winded on cylindrical bobbins.
It is possible to produce 3 identical gimps thanks to the collector device and the stitch density regulator device that are working simultaneously.

High speed SEMI-ELECTRONIC spiral covering machine with 3 independent heads versatile and highly functional suitable for the production of strings and cords with and without covering in different diameters between 1 and 4 mm both in 2/3 heads created in a single working section and “classical gimp”, i.e. covered yarn and twisted gimp with right and left rotation collected in standard cones.
The different dynamic functions of PENELOPE 3 PLUS make it suitable for the production of different types of products; its versatility and simplicity get a good level of production compared to the existing standard, reaching 7 meters/ minute for the cord.
PENELOPE 3 PLUS is provided with a selector for the control and management of 3 heads and independent stop of the covering spindles.
PENELOPE 3 PLUS is driven by separate motors that allow a marked working flexibility in every circumstance.
PENELOPE 3 PLUS is provided with an INVERTER for the machine speed rotation adjustment between 0 and 15.000 rpm.
The finished product is winded on cylindrical bobbins.

High speed SEMI-ELECTRONIC spiral covering machine with 3 independent heads versatile and highly functional suitable for the production of strings and cords with and without covering in different diameters between 5 and 10 mm both in 2/3 heads created in a single working section and “classical gimp”, i.e. covered yarn and twisted gimp with right and left rotation collected in standard cones.
The different dynamic functions of PENELOPE 3 Max make it suitable for the production of different types of products; its versatility and simplicity get a good level of production compared to the existing standard, reaching 7 meters/minute for the cord.
PENELOPE 3 Max is provided with a selector for the control and management of 3 heads and independent stop of the covering spindles.
PENELOPE 3 Max is driven by separate motors that allow a marked working flexibility in every circumstance.
PENELOPE 3 Max is provided with an INVERTER for the machine speed rotation adjustment between 0 and 15.000 rpm.
The finished product is winded on cylindrical bobbins for gimp or on flanged bobbin for cord.

ISOTTA a very versatile and high quality spooling machine.

ELECTRONIC twisting machine for the production of one strand twisted cords.
IRIS 3 with the addition of a particular device is also suitable for the production of normal cords on 2-3 strands in two distinct working phases.
IRIS 3 has 3 independent twisting heads; each head is composed by yarn feeder, meters counter and twisting device. By means of a selector each single head can be excluded according to the user’s needs.
IRIS 3 is the result of a constant research in the sector of textile machinery, looms, twisting machines to which is added a perfect knowledge of the electronic applications that permitted the achievement of an avant-garde in the traditional domestic and overseas market.
IRIS 3 can fit bobbins with a 250 mm. diameter and 200 mm.width. To collect a greater quantity of product and a greater autonomy of the machine can be fitted smaller diameters bobbins without compromising the proper functioning of the machine.
IRIS 3 can also be provided of creel for 60 cone bobbins with 130 mm diameter for covering and 42 cylindrical cones with 130 mm diameter for the core getting a strand with a maximum diameter of 6 mm.
IRIS 3 has an electronic control for managing, by setting the diameter and twisting cord, the automatic brake regulation that changing the cones diameter increases or decreases the brake work effort. Using the control panel on the machine you can manage the operation of the doors preventing the opening up to the total stopping of the moving parts in the machine and preventing, in the case of the open door, the start-up cycle for the production in accordance with
EC standards.